mfit.ini config-file

Discussion in 'MATLAB' started by martijn clarijs, Mar 31, 2006.

  1. Dear Mfit users,

    I cannot seem to get a stable version of Mfit running on my PC
    system. I use Matlab 7 in combination with
    MFit 4.3 (June 29th 2003) (i also tried the newest version, but even
    more problems occurred).

    One of the things that does not seem to work is that the mfit
    ini-file is always read from the current directory.

    Also MFit saves the ini file by default to current dir and if it is
    not there, it creates one, or multiple ones, since I switch between
    data dir’s when working with
    Matlab. How to overcome this problem?

    Below I include the ini file I would like to use Unfortunately,
    running with mfit does not go without errors. Perhaps I am mistaking
    in the last statements?

    my mfit.ini file:

    {General}
    LoadRoutineFile = illgui
    LoadRoutineDir =
    LoadRoutineName = ILL TAS data GUI
    FitFuncFile = multifunc
    FitFuncDir =
    FitFuncName = MF+gaussian+n order polynome : clik on Guess
    button to set n.
    FitRoutineFile = mf_flsqr
    FitRoutineDir =
    FitRoutineName = Levenberg Marquardt gradient (Fast)
    BatchFile = temp.mbt
    BatchDir =
    DataDir = /usr/illdata/data/
    PreviousDataFile = unknown.dat
    OutDir =
    FigurePosition = 537 289
    FigureSize = 400 350
    FigureBgColor = gray
    AxesColor = black
    FitColor = green
    EbarColor = red
    DataColor = black
    DataColorSelected = red
    MarkerSize = 10
    DataLineStyle = none
    AutoGuess = 0
    AutoSave = 0
    AutoRescale =
    ShowPwinAtStart = 0
    ShowBatchShell =
    ExecAfterLoad =
    ExecAfterFit =
    TextBoxHeight = 18
    AxesFont = Times
    AxesFontSize = 12
    LabelFont = Times
    LabelFontSize = 16
    ContWinPosition = -2 532
    ParWinPosition = 50 50
    IniFile = mcl_mfit.ini
    ShowBatchLine = 0
    FitPoints =
    CmdBatch = help
    OutFile = temp.mft
    OutDir =
    {Load Routines}
    illgui , , ILL TAS data GUI
    illbatch , , ILL TAS data Auto/Batch
    tasgui , , TASCOM (Riso data format) GUI
    tasbatch , , TASCOM (Riso data format) Auto/Batch
    specgui , , SPEC GUI
    specbatch , , SPEC Auto/Batch
    ==Separator==========
    multigui , , General Load routine GUI
    multibatch, , General Load routine Auto/Batch
    xyeload , , X Y error columns text file
    mf_gpar , , MFIT parameter file (v1.0)
    frombase , , Direct User data entry
    {Fit Functions}
    gauss , , Gaussian
    gauss2 , , Gaussian squared
    sgauss , , Gaussian (sloping background)
    lorz , , Lorentzian
    lorz2 , , Lorentzian squared
    airyfp , , Airy (for Fabry Perot)
    cusp , , Cusp (double power law)
    dho , , Damped Harmonic Oscillator
    triangl , , Triangular peak (width fwhm)
    voigt , , Voigt function
    dirac , , Dirac peak
    heaviside , , Heaviside peak
    ==Separator==========
    gaussx2 , , Two Gaussians
    lorzx2 , , Two Lorentzians
    lorgss , , Lorentzian + Gaussian
    green , , Green function
    ==Separator==========
    ngauss , , N Gaussians
    nlorz , , N Lorentzians
    multifunc , , MultiFunctions...
    ==Separator==========
    pow , , Power law (below x0)
    pow1 , , Power law (above x0)
    ellipse , , Ellipse
    background, , Constant (Background)
    strline , , Straight line (ax+b)
    quadrat , , Quadratic (ax^2+bx+c)
    poly
     
    martijn clarijs, Mar 31, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.