Splitting Bus signals into single signals

Discussion in 'MATLAB' started by Michael Boelling, Apr 20, 2007.

  1. Michael Boelling

    Michael Boelling Guest

    Hello,
    is there an esay command or skript to split busses from a bus signal
    into signals for each of the bus signals. I mean creating a bus
    selector that automatically generates a port for each signal in the
    bus via a skript. And of course the other way round as well by adding
    a buscreator.

    Many thanks for your info.

    Michael Boelling
     
    Michael Boelling, Apr 20, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Bus signals to workspace

  2. Initial Conditions in Unit Delay Blocks with Bus Signals

  3. Add signal to bus with unknown signals

  4. Why Bus Object themselves have to have dimension 1 inside a Bus?

  5. Embedded Matlab--Working with structures and Bus signals

  6. Using a bus for closed-loop signals in simulink

  7. passenger waiting time at a bus stop when bus has limited carrying capacity of passengers

  8. Selecting signals in Bus-selector block using M-script

Loading...